Now, therefore, in consideration of the foregoing premises, and of the mutual promises and covenants herein contained, the parties, intending to be legally bound, do hereby agree as follows:
1. TERMS & DEFINITIONS
In this document the following words shall have the following meanings:
a. "Buyer" means the organization or person who buys Goods;
b. "Goods" means the articles to be supplied to the Buyer by the Seller;
c. "Seller" means Precision Peeps, LLC., 17011 Lincoln Avenue #556, Parker CO 80134
d. "Intellectual Property Rights" means all patents and patents-pending, registered and unregistered designs, copyright, trademarks, know-how, and all other forms of intellectual property wherever in the world enforceable.
The Buyer may place orders (“Order(s)”) with Seller for Seller products and all such Orders will be governed solely by the terms and conditions contained in this Sales Contract, unless otherwise mutually agreed. Any oral understandings are expressly excluded. Seller shall not be deemed to have waived the terms and conditions contained herein if it fails to object to provisions appearing on, incorporated by reference in, or attached to any Buyer order form, and those provisions are hereby expressly rejected. No contrary or additional terms or conditions contained in any Buyer order form shall apply unless agreed to in writing and signed by an authorized representative of Seller. Additionally, Seller reserves the right to reject any Order submitted to it by Buyer.
Delivery shall be made within the time specified on Buyer’s Order or in accordance with Seller’s quoted lead time and monthly delivery rate, whichever is later. Transportation charges shall be prepaid and Buyer shall reimburse Seller upon receipt of an invoice for such charges. Seller shall have the right to make early, accelerated and/or partial shipments in advance of the contractual delivery schedule, in its sole and absolute discretion.
The Buyer shall inspect and accept, or reject products delivered pursuant to the Order immediately after Buyer takes custody of such products. In the event the products do not comply with the applicable Seller drawings or specifications, the Buyer shall notify the Seller of such nonconformance and give the Seller a reasonable opportunity to correct any such nonconformance. The Buyer shall be deemed to have accepted any products delivered hereunder and to have waived any such nonconformance in the event Seller does not receive notification that the products delivered hereunder do not comply with the Seller’s drawings or specifications, within fifteen (15) days after the Buyer takes custody of such products.
Seller at all times reserves the right, and is entitled in its sole discretion, to make changes, additions or improvements to the products being delivered under an Order without liability or any obligation to incorporate such changes, additions or improvements into any item or product manufactured, sold or delivered prior to incorporation of the change, addition or improvement.
Where a sample of the Goods is shown to and inspected by the Buyer, the parties hereto accept that such a sample is representative in nature and the bulk of the order may differ slightly as a result of the manufacturing process.
7. PRICES AND PAYMENTS
Prices and payments will be in United States dollars. Seller has determined a Minimum Advertised Price (MAP) of $19.99 (USD) to protect all buyers and intermediaries. All payments shall be made in United States currency. Invoice terms are net 30 days unless otherwise specified. Prices quoted are believed to be accurate; however, Seller reserves the right to correct any inadvertent errors in these prices prior to acceptance of the Order. Seller reserves the right to modify or withdraw credit terms at any time without notice and to require guarantees, security or payment in advance of the amount of credit involved. In the event payments are not made in a timely manner, Seller may, in addition to all other remedies provided at law, either: (1) declare Buyer’s performance in breach and terminate this Order for default; (2) repossess the goods for which payment has not been made; (3) withhold future shipments under this Order until delinquent payments are made; (4) deliver future shipments under this Order on a cash with Order or cash in advance basis even after the delinquency is cured; (5) charge interest on the delinquency at a rate of 3% per month or the maximum rate permitted by law, if lower, for each month or part thereof of delinquency in payment plus applicable storage charges, or inventory carrying charges; or (6) recover all costs of collection including reasonable attorney’s fees; and (7) at Seller’s option combine any of the above rights and remedies as provided by law.
All amounts that Buyer owes Seller under an Order shall be due and payable according to the terms of an Order. Buyer is prohibited from and shall not set off such amounts or any portion thereof, whether or not liquidated, against sums which Buyer asserts are due it, from its parent affiliates, subsidiaries or other divisions or units under other transactions with Seller, its parents, affiliates, subsidiaries or other divisions or units.
As used in this Section “Nonconformance” means a failure to comply with or failure to operate due to noncompliance with applicable Seller drawings or having defects in workmanship or material. Normal wear and tear and the need for regular overhaul and periodic maintenance shall not constitute a Nonconformance. Seller warrants that at time of delivery to Buyer, its Products will comply with applicable Seller drawings and will be free from defects in workmanship and material. These warranties shall run to the Buyer, its successors, and assignees. This warranty is valid for twelve (12) months after Seller’s shipment of the Product. The warranty period for Seller’s repair or replacement of the failed product only, covered by the warranty, shall be the unexpired portion of the original warranty or 6 months after shipment of the repaired or replaced product, whichever is longer. Buyer must notify Seller in writing of the Nonconformance of any Product within the warranty period and return the Product to Seller within thirty (30) days after such discovery. The risk of loss or damage to all Products in transit shall be borne by the party initiating the transportation of such Products.
Seller shall not be liable under this warranty if the Product has been exposed or subjected to:
a. Any maintenance, repair, installation, handling, transportation, storage, operation or use which is improper or otherwise not in compliance with Seller’s instruction; or
b. Any alteration, modification or repair by anyone other than Seller or those specifically authorized by Seller; or
c. Any accident, contamination, foreign object damage, abuse, neglect or negligence after delivery to Buyer; or
d. Any damage precipitated by failure of a Seller supplied Product not under warranty or by any Product not supplied by Seller,
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN OR ORAL, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE WHICH ARE HEREBY EXPRESSLY DISCLAIMED. IN NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR SPECIAL DAMAGES OF ANY KIND. NO EXTENSION OF THIS WARRANTY SHALL BE BINDING UPON SELLER UNLESS SET FORTH IN WRITING AND SIGNED BY SELLER’S AUTHORIZED REPRESENTATIVE.
10. EXCUSABLE DELAY
The Seller shall be excused from delays in delivery and performance of other contractual obligations under this Order caused by acts or omissions that are beyond the reasonable control and without the fault or negligence of Seller including but not limited to Government embargoes, blockades, seizure of assets, delays or refusals to grant an export license or the suspension or revocation thereof, or any other acts of any Government, fires, floods, severe weather, or any other acts of God, quarantines, labor strikes or lockouts, riots, strife, insurrection, civil unrest, war, material shortages or delays in deliveries to Seller by third parties. If the excusable delay circumstances extend for six months, either party may, at its option, terminate this Order without penalty or liability and without being deemed in default or in breach thereof.
Buyer reserves the right to cancel any portion of this Order affected by a default of Seller or any insolvency or suspension of Seller’s operations or any petition filed or proceeding commenced by or against Seller under any state or federal law relating to bankruptcy, arrangement, reorganization, receivership or assignment for the benefit of creditors.
Except as otherwise specifically agreed in writing by Buyer and Seller, any dispute relating to an Order placed by a Buyer incorporated in the United States which is not resolved by the parties shall be adjudicated by any court of competent jurisdiction. For Orders placed by a Buyer incorporated outside the United States, the parties shall resort to binding arbitration under mutually agreed procedures.
13. APPLICABLE LAW
This Agreement shall be interpreted in accordance with the laws of the jurisdiction in which the Seller’s facility accepting the Order hereunder is located, exclusive of any choice of law provisions.
Unless otherwise agreed, Buyer shall be responsible for compliance with the export control laws and regulations of the U.S. Government, and when required by such laws and regulations shall obtain validated export and re-export licenses required for goods, services and technical data delivered under this Order. Seller shall not be liable to Buyer for any failure to provide goods, services or technical data as a result of any following U.S. Government actions: (1) refusal to grant export or re-export license; (2) cancellation of export or re-export license; or (3) any subsequent interpretation of U.S. export laws and regulations, after the date of this order, that limits or has a material adverse effect on the cost of Seller’s performance on this Order.
15. LIMITATION OF LIABILITY
Seller’s liability on any claim for loss or damage arising out of, connected with, or resulting from an Order, or from the performance or breach thereof, or from the manufacture, sale, delivery, resale, repair or use of any product covered by or furnished under an Order shall in no case exceed the price allocable to the product or part thereof which gives rise to the claim, except as provided in the paragraph entitled “Patent Indemnity.” In no event shall Seller be liable for special, incidental or consequential damages. Except as herein expressly provided to the contrary, the provisions of this Order are for the benefit of the parties to the Order and not for the benefit of any other person.
16. NONDISCLOSURE AND NON-USE OFSELLERS INFORMATION
Buyer agrees that it will not use Seller’s data for the manufacture or procurement of products which are the subject of this Order or any similar products, or cause said products to be manufactured by or procured from any other source, or reproduce said data and information or otherwise appropriate them without the written authorization of the Seller. Buyer agrees that it will not disclose or make available to any third party any of Seller’s data or other information consent.
17. PATENT INDEMNITY
Except insofar as an Order calls for products pursuant to Buyer’s designs, drawings or specifications, seller’s indemnity shall not apply where infringement would not have occurred from the normal use for which the products were designed. No responsibility is assumed for actual or alleged infringement of any foreign patent. Seller’s liability for damages hereunder is limited to those computed solely on the value of any products sold to Buyer. In no event shall Seller be liable for consequential damages or costs applicable thereto. In the event of any claim that a product furnished hereunder infringes any United States patent, Seller may at its option and expense (a) procure for Buyer the right to continue using the product, or (b) replace or modify the product so that it becomes non-infringing, or (c) grant Buyer a credit for such product, less a reasonable depreciation for use, damage, and obsolescence upon its return to Seller. Buyer agrees to pay all costs and expenses incurred by Seller in its defense and the amount of any judgment against Seller, in any suit or proceeding against Seller based upon a claim of infringement, resulting solely from the Buyer combining any product furnished hereunder with any item not manufactured or furnished by Seller or from the sale or use of any such combination by Buyer. Seller shall also indemnify Buyer’s Buyers and agents for such infringement, if and to the extent that Buyer has agreed so to indemnify them, but to no greater extent than Seller has indemnified Buyer herein and under the same conditions as set forth herein. In the event any product to be furnished under this Order is to be made in accordance with drawings, samples or manufacturing specifications designated by Buyer and is not the design of Seller, Buyer agrees to defend, indemnify and hold Seller harmless to the same extent and subject to the same requirements as set forth in Seller’s obligation to Buyer as above. The above is in lieu of any other indemnity or warranty, express or implied by Seller, with respect to intellectual property (patents, trade secret, mask works, trademarks, copyrights, or the like).
18. SPECIAL TOOLING AND DATA
Unless otherwise agreed in writing, all material, software, data processes, equipment, facilities and special tooling, which term includes but is not limited to jigs, dies, fixtures, molds, patterns, special taps, special gages, special test equipment, other special equipment and manufacturing aids and replacements thereof, used in the manufacture of products covered by an Order shall be and remain the property of Seller. Seller retains all rights, title and interest in drawings, engineering instructions, specifications, and all other written data, if any, furnished with the products.
The prices quoted herein do not include sums necessary to cover any taxes or duties including but not limited to Federal, State, Municipal excise, sales or use taxes or import duties upon the production, sales, distribution, or delivery of goods or furnishing of services hereunder. Any taxes or duties that are due and owing hereunder shall be paid by the Buyer. Accordingly, Seller reserves the right to revise its price after the execution of this Order between the parties to include any and all taxes or duties that may become due hereunder and Seller may invoice Buyer for said additional amount. This clause shall survive the acceptance and complete performance of this Order by the parties herein.
Neither party shall assign this Order or any portion thereof without the advance, written consent of the other party, which consent shall not be unreasonably withheld. The non-assigning party shall not have any obligation to an assignee of the assigning party unless such consent is obtained.
Failure by Seller to assert all or any of its rights upon any breach of this Order shall not be nor shall any waiver be implied from the acceptance of any payment or service. No waiver of any right shall extend to or affect any other right Seller may possess, nor shall such waiver extend to any subsequent similar or dissimilar breach.
If any provision of these Conditions of Sale is determined to be illegal, invalid, or unenforceable, then such provision shall be deemed stricken for purpose of the dispute in question, and all other provisions shall remain in full force and effect.